Analysis of Causes of Daily Water Leakage of Cooling Tower

　　With the general production and application of cooling towers, the editor of Teling below will introduce some practical factors for the usual leakage of closed cooling towers. You can actually see the following.mWFCooling tower noise reduction treatment manufacturer

　　Water leakage is one of the common problems of closed cooling towers. However, according to our conventional methods, most of the closed cooling towers are made of stainless steel plates or galvanized steel plates, and the cooling water is also circulated in closed copper pipes, and there should be no leakage. .mWFCooling tower noise reduction treatment manufacturer

　　Guangdong cooling tower manufacturer trlon Air Conditioning introduced the factors of water leakage in closed cooling towers

　　1. Water leakage in the junction of the tower body and basin

　　In the process of assembling the closed cooling tower, the aluminum-zinc plates are all rubbed with glue to carry out compaction and sealing. Long-term operation, the impact of spray water, the deformation of the basin, and the drop of sealant all cause water leakage at the joint. Because the spray water is concentrated in the pool at the bottom, leaking water means that the spray water needs to be continuously filled. The closed cooling tower section is all aluminum-zinc plated, which can be filled with sealant from the inner gap of the closed cooling tower to prevent leakage.mWFCooling tower noise reduction treatment manufacturer

　　2. The collection and storage tank is corroded and leaking

　　This is mainly because of the long-term application, and it is also possible that the environment and water quality of the local application have high acidity and alkalinity. The material of the collection and storage tank has been corroded. The thickness of the tank shell is uneven, which is convenient in the thin and relatively thin places. A damaging water leak will occur. Water leakage will increase water consumption, increase environmental pollution, and accelerate the corrosion of other accessories and poor circulation. If it is a glass fiber reinforced plastic closed cooling tower, we can choose to clean the surface layer, polish and clean it, use a cleaning agent to degrease, use epoxy repair agent and glass fiber tape to carry out the reinforcement method, if it is the material of aluminum-zinc plate, consider To the replacement part of the galvanized sheet.mWFCooling tower noise reduction treatment manufacturer

　　3. Leaking water pump

　　This is very rare. You have to contact the pump manufacturer in time, saying that the pump leaks will cause the pressure to be unstable and affect the circulating water system.mWFCooling tower noise reduction treatment manufacturer

　　4. Water leakage in connecting pipe

　　In the process of pipe layout, some flanges and elbows will be connected. During the process of connection, a sealing ring will be added between the two joints. The pipeline leaks. Most of the factors are that the pipeline is not tightly connected. , The sealing ring is damaged or the position displacement is caused by the weak sealing, resulting in water leakage.mWFCooling tower noise reduction treatment manufacturer

　　For more information about closed cooling towers, please follow our official website at any time. Welcome new and old customers to inquire.mWFCooling tower noise reduction treatment manufacturer

Article Address：https://www.trlen.com/baike/270.html