What should be paid attention to when purchasing closed cooling tower?

　　When we carry out the purchase of closed cooling tower, first of all, special attention should be paid to the design of the air wet bulb temperature and its inlet and outlet tower water temperature; Next, we should pay attention to check the specifications and weight of the packing of the enclosed cooling tower itself; Subsequently, special attention should be paid to the height and width of the cooling tower, as well as its volume, diameter and depth of the packing of the FRP cooling tower.JbaCooling tower noise reduction treatment manufacturer

　　Enclosed cooling tower is a deformed development of traditional cooling tower. It is actually a combination of evaporative cooling tower, cooler and wet cooling tower. It is a horizontal evaporative cooling tower. The process fluid flows through the tube, and the air flows out of the tube. The water in the tank at the bottom of the tower is extracted by the circulating pump and sent out of the pipe to be sprayed evenly. It is not in contact with the process fluid hot water or refrigerant and the outer space of the tube. It becomes a closed cooling tower and enhances the heat and mass transfer effect by spraying water.JbaCooling tower noise reduction treatment manufacturer

　　When carrying out the selection of closed cooling towers, special attention should be paid to the observation of the wind speed and sprinkling density in the packing of FRP cooling towers; If said to meet the CTI standard, to pay special attention to ask its standard number and name; Subsequently, attention should be paid to the selection of an inlet and outlet pipe diameter or the corresponding flow rate for the cooling tower itself.JbaCooling tower noise reduction treatment manufacturer

　　When the closed cooling tower is purchased, special attention should be paid to the water storage volume and effective volume of the water collecting tray. Then, special attention should be paid to the water pressure into the cooling tower, and then to the height of the air inlet.JbaCooling tower noise reduction treatment manufacturer

　　As for the enclosed cooling tower, there should be certain provisions on its placement position, which will affect the establishment and service life of the enclosed cooling tower's own characteristics at a certain level. Furthermore, if we are willing to ensure that two or more closed cooling towers are carried out and used, special attention should be paid to maintaining the distance between the tower body to a large extent; Keep away from hot areas such as kitchens and their boiler rooms.JbaCooling tower noise reduction treatment manufacturer

　　Closed cooling tower can not be installed on four sides of the wall or airtight area, special attention should be paid to the distance between the tower body and the wall; Can not be installed in the place where there is soot or dust more to avoid blocking the film above; Enclosed cooling towers should not be installed in watertight passages or high walls that are prone to reflecting volume.JbaCooling tower noise reduction treatment manufacturer

Article Address：https://www.trlen.com/baike/404.html