Basic principles of closed cooling tower water circulation system

　　Basic principles of closed cooling tower water circulation system:

　　The closed cooling tower uses the working pressure caused by the centrifugal water pump or other working pressure equipment, so that the higher temperature water from the cooler, absorber or process technology, that is, the cooling circulating water is transferred to the closed cooling tower In the refrigeration fan coil, the cooling circulating water enters the closed cooling tower, and the heat exchange is carried out according to the fitness exercise in the closed cooling tower and its contact with the wind liquid, and the intelligence after entering the closed cooling tower According to the working pressure swirling sprinkler equipment installed on the top of the tower and the upper end of the air pipe, the backwater produces small raindrop particles that are sprayed vertically downwards for fast fitness exercise, completing the daily task of expanding the area of ​​water droplets.M9PCooling tower noise reduction treatment manufacturer

　　The water droplets will continue to encounter the rising air during the whole process of lowering, which slows down the drop rate of the water droplets, thereby increasing the heat exchanger time. The heat of the liquid is first sent to the inner cavity of the air-conditioning copper pipe, and then sent from the inner cavity to the surface of the air-conditioning copper pipe, and then sent to the self-spraying shrinking water on the surface. The shrinking water and gas produce saturated cold and wet steam, and the heat is generated by the centrifugal fan. When the air is discharged, a part of the water droplets are acquired by the water filter to reduce the damage of self-spraying water.M9PCooling tower noise reduction treatment manufacturer

　　When the self-spraying water drops to a certain amount, the float switch automatically replenishes and moisturizes, and the cycle continues like this. In addition, because the closed cooling tower removes the filling equipment and becomes an empty tower, it reduces the frictional resistance of the tower body. With the effect of the centrifugal fan, the wind force and exhaust volume are expanded, and the water vapor is increased. Ratio, and then achieve the goal of improving the actual effect of temperature reduction.M9PCooling tower noise reduction treatment manufacturer

　　Collection reservoir: collect the water after passing through the heat transfer fan coil, and also use it for storage and adjustment of the water flow, so as to achieve the goal of saving water resources in the circulation system.M9PCooling tower noise reduction treatment manufacturer

　　Venetian blinds: Use the wind to enter the tower evenly, so that the self-spraying water does not splash.M9PCooling tower noise reduction treatment manufacturer

　　Maintenance door: convenient maintenance and mid-to-late maintenance.M9PCooling tower noise reduction treatment manufacturer

　　Centrifugal fan: The centrifugal fan is used to introduce the gas into the tower to create a high water flow and a stable total flow of gas, thereby improving the high efficiency of refrigeration and ensuring the actual effect of refrigeration.M9PCooling tower noise reduction treatment manufacturer

　　water collection filter: use high-efficiency intensive water collection filter to reduce the circulation damage of refrigerating water.M9PCooling tower noise reduction treatment manufacturer

　　Automatic spray system: make the high-temperature cooling circulating water entering the tower expand the contact area with the gas as much as possible, improve the exchange of boiling water between the steam, and send the heat of the high-temperature cooling water to the gas, thereby reducing the cooling circulating water Temperature, to achieve the purpose of repeated use of the water source.M9PCooling tower noise reduction treatment manufacturer

　　Cooler: The cooler is a key component of the closed cooling tower. Its effective structure specifications and effective layout method will immediately endanger the heat exchange efficiency of all closed cooling towers, and it will also endanger the cooling cycle of all closed cooling towers. The cooling capacity of water. The skewed layout of the cooler is beneficial to draining the water in the cooler in winter and avoiding freezing and breaking of the air-conditioning copper pipe.M9PCooling tower noise reduction treatment manufacturer

Article Address：https://www.trlen.com/news/329.html