What are the accessories that make up a closed cooling tower

　　Everyone knows about major shopping malls, subway stations, long-distance bus stations, and so on. Many places use different types of cooling towers. The larger the place, the more refrigeration products are in demand. So when purchasing these refrigeration products, it is necessary to understand what kind of products, components and uses of the products. Then let’s introduce the closed cooling tower for everyone:9cfCooling tower noise reduction treatment manufacturer

　　1. Cooling fan: According to different requirements of users, it can be made into glass fiber reinforced plastic, carbon steel sprayed plastic, stainless steel, general, variable frequency, large number, low noise fan;9cfCooling tower noise reduction treatment manufacturer

　　2. Dehydrator: In order to save valuable water resources, the lower part of the special fan is equipped with a high-efficiency dehydrator, and the water collection efficiency of the air duct is 99.99%;9cfCooling tower noise reduction treatment manufacturer

　　3. Water supply system: high-strength pvc pipes are used for the upper water pipes, and low-lift, large-flow, low-power, low-noise water pumps are used for the water pump;9cfCooling tower noise reduction treatment manufacturer

　　4. Air inlet grille: Choose PVC or carbon steel to make air inlet grilles of different shapes according to different application occasions, which are non-blocking, protected from direct sunlight, and reduce the propagation of algae and microorganisms in the cooling water;9cfCooling tower noise reduction treatment manufacturer

　　5. Active water replenishment device: In order to supplement the loss of water due to transpiration, the device has an active water replenishment device, which is convenient and flexible;9cfCooling tower noise reduction treatment manufacturer

　　6. ​​Filter: In order to prevent the water pump from blocking and causing shutdown, a filter is installed at the water inlet to prevent weeds and other sundries from entering the pump and causing shutdown failure;9cfCooling tower noise reduction treatment manufacturer

　　7. Housing: In order to get used to the harsh environment, the equipment housing can be made into carbon steel sprayed plastic, stainless steel, hot-dip galvanized sheet sprayed, internal hot-dip galvanized external sprayed and other forms of equipment shells according to the requirements;9cfCooling tower noise reduction treatment manufacturer

　　8. Water collection tank: made of high-quality galvanized steel plate, electrostatic sprayed anti-corrosion, the bottom of the water tank uses a concave-convex box stepped form, which is convenient for sewage disposal;9cfCooling tower noise reduction treatment manufacturer

　　9. Spray water device: The large-flow flower basket nozzle is selected, which has the characteristics of large flow, no blockage, uniform water distribution, and no dead ends;9cfCooling tower noise reduction treatment manufacturer

　　10. High-efficiency heat exchange coil: According to different application requirements, the raw materials are: stainless steel pipe, copper pipe, carbon steel pipe, aluminum alloy pipe. The tube types are: oval tube and threaded tube. After the carbon steel pipe is made, the whole body is hot-dip galvanized for corrosion protection.9cfCooling tower noise reduction treatment manufacturer

Article Address：https://www.trlen.com/news/524.html