Working principle and selection of high-temperature closed cooling tower

　　Working principle and selection of high-temperature closed cooling towerlSrCooling tower noise reduction treatment manufacturer

　　1. A high-temperature closed cooling tower utilizes pressure generated by a water pump or other pressure device to transport high-temperature water, i.e. cooling water, from a condenser, absorber, or process equipment to the cooling coils of the cooling tower. The circulating water enters the cooling tower and exchanges heat through movement in the tower and contact with the airflow. After entering the cooling tower, the return water passes through a pressure swirl nozzle device installed at the top of the tower and the upper part of the air duct, forming small water droplet particles that move vertically and downward at high speed, completing the task of increasing the surface area of water droplets.lSrCooling tower noise reduction treatment manufacturer

　　2. At the same time, water droplets also encounter upward airflow during their descent, which slows down the descent speed of water particles and prolongs the heat exchange time. The heat of the fluid is first transferred to the inner wall of the copper tube, then to the outer wall of the coil, and then to the spray water film on the outer wall. The water film and air form saturated moist and hot steam, and the heat is discharged into the atmosphere by the fan. Some of the water droplets are recovered by the water collector, reducing the loss of spray water.lSrCooling tower noise reduction treatment manufacturer

　　3. Considering that the alloy is larger than 3061, and taking into account the manually created small-scale test, it has been decided to install it in a water cooling tower. During the entire construction process of the water cooling tower, its cooling cost increased from over 21000 yuan to 34000 yuan. Considering the delay in logistics transportation, the cooling tower has been pulled from four levels to the bottom to increase its rated coolant and service life, resulting in an average of one cooling tower per water cooling tower. Considering the requirements of design mechanics, a double trapezoidal foundation is made of steel coils, and the cooling capacity gradually increases.lSrCooling tower noise reduction treatment manufacturer

　　High temperature closed cooling tower reduces the operating temperature of refrigerant unitslSrCooling tower noise reduction treatment manufacturer

　　1. In the early stage of design, should we look at the design drawings or adjust the cooling capacity to adjust the increase or decrease in cooling capacity. The main purpose of refrigeration equipment is to reduce production costs during the cooling operation of the cooling tower. Refrigeration machinery is designed to maximize the cooling effect.lSrCooling tower noise reduction treatment manufacturer

　　2. The refrigeration unit pipeline needs to be circulated, which requires naturally flowing cooling water. There should be an ice platform and connecting parts.lSrCooling tower noise reduction treatment manufacturer

　　Selection of High Temperature Closed Cooling Tower:lSrCooling tower noise reduction treatment manufacturer

　　1. Except for refrigeration units: diesel generator sets with a capacity of 150kw or more should be selected;lSrCooling tower noise reduction treatment manufacturer

　　2 High temperature closed cooling towers Cooling oil quantity: Water cooling oil should use 85% austenitic deteriorated lubricating oil, add oil to adjust the concentration, and avoid leakage.lSrCooling tower noise reduction treatment manufacturer

Article Address：https://www.trlen.com/news/767.html