The cooling tower motor generates heat during actual operation, and the motor shell is hot. If the above problem occurs to the cooling tower motor, please check the following reasons immediately...
The phenomenon of water floating has a great impact on the safety of the cooling tower operation itself and the safety of the surrounding equipment environment. The main hazards of the phenomenon of cooling tower water floating are as follows:
The air leakage of the cooling tower reduces the exhaust air volume in the tower. According to the increase of the air leakage of the cooling tower, the heat exchange between the cold air and the circulating water in the tower is relatively small, and the heat discharged naturally decreases; the cooling effect of the cooling tower will decrease...
The use of cooling tower is to achieve a certain cooling effect, cooling effect depends on the heat sink, fan air volume. Cooling tower water consumption, ventilation conditions, installation location will also have a certain impact on its effect. Next, let's take a look at the influence of cooling tower fins and fan air volume on the cooling system
The closed cooling tower has the characteristics of environmental protection, reliability and high efficiency after the transformation
Packing is the most important part of the cooling tower, its efficiency depends on the full contact degree of cooling water and air in the packing, so how to replace the cooling tower packing...
The water temperature of the cooling tower does not drop in the operation of the water temperature can not fall down sometimes is a normal phenomenon, and sometimes there is a failure of the cooling tower, which needs to be analyzed according to the specific situation.
The installation position of the cooling tower should consider the pressure requirements of the water system? What problems are likely to occur when multiple cooling towers are connected in parallel? This is a professional problem about the cooling tower, which also needs us to know
Closed cooling tower is a kind of cooling tower, which is very common in industrial activities. Its components include main engine, water tank, circulating water pump and electric control cabinet, etc.
To a certain extent, the closed cooling tower is based on the mathematical model of the heat transfer and quality performance of the closed cooling tower, and the solution of the analytical model is obtained...
Guangdong Trlon Energy-saving Air Conditioning Equipment Co., Ltd.
Company Address： 1916A, Block A, David Donglong Business Building, Longhua, Longhua District, Shenzhen