Trlon air conditioner manufacturers have silent cooling towers, closed cooling towers and cooling tower noise reduction, maintenance and transformation services.
National Service Hotline National Service Hotline:

4008-8383-95

Your current location:HOME > News > Industry News

Industry News

  • Corrosion comparison between closed cooling tower and open cooling tower

    Corrosion comparison between closed cooling tower and open cooling tower09-14

    Closed cooling towers have a greater impact on water than open cooling towers. The closed cooling tower adopts a closed design, which is divided into inner circulating water and outer ring water. The infiltration of the closed cooling tower and water will only affect the spray of the outer cooling coil, and the water quality is relatively easy to lose...

  • The impact of environmental pollution during the operation and use of cooling towers

    The impact of environmental pollution during the operation and use of cooling towers09-13

    The closed cooling tower exhibits emissions during operation. Due to the composition, it may cause certain pollution to the environment. The following will focus on this topic and take a closer look at the emissions and pollution of the closed cooling tower.

  • What is the reason for the reduced heat dissipation of the closed cooling tower

    What is the reason for the reduced heat dissipation of the closed cooling tower09-10

    With the long-term use of closed cooling towers, the cooling efficiency will decrease to varying degrees. In order to ensure the normal operation of the closed cooling tower, we should check and maintain the cooling tower in time. There are many factors that affect the cooling efficiency of cooling towers...

  • What are the structural characteristics of the cooling tower

    What are the structural characteristics of the cooling tower09-09

    Many people don’t know much about the structural characteristics of cooling towers. The closed cooling tower manufacturer China trlon air conditioner will give you an introduction. Cooling tower body: reasonable shape, stable airflow, good material, bright color, surface gel coat resin contains anti-ultraviolet agent ...

  • Maintenance and solution of the cause of the failure of the cooling tower reducer

    Maintenance and solution of the cause of the failure of the cooling tower reducer09-09

    The common method of cooling tower reducer movement obstacle failure is to find out the main characteristics of the failure, especially the various traces produced during the development of the failure, and then analyze the force relationship of the damaged parts through the traces to find out the cause of the abnormal force...

  • What is the use of regular inspection and anti-corrosion maintenance of cooling towers

    What is the use of regular inspection and anti-corrosion maintenance of cooling towers09-07

    The inside of the cooling tower not only affects the operation of the cooling tower, but also has a certain impact on the daily protection of the cooling tower. Therefore, in the daily protection process, the calcium deposits inside the cooling tower must be carefully and timely cleaned to avoid These precipitated calcium have severe effects on cooling tower

  • What are the benefits of cooling tower energy saving

    What are the benefits of cooling tower energy saving09-06

    As an indispensable equipment for cooling of circulating water, cooling tower energy saving has brought huge energy saving effects to users in the industrial and civil fields, protecting the waste of water resources, and cooling towers also have many problems to achieve the effect of energy saving and emission reduction.

  • Structural characteristics and precautions of cross-flow FRP cooling tower

    Structural characteristics and precautions of cross-flow FRP cooling tower09-06

    There are two different series of cross-flow cooling towers, low-noise type and ultra-low-noise type, and industrial type with medium and high water temperature drop in addition to low-noise and ultra-low-noise type.

  • Suggested method for structural optimization of closed cooling tower

    Suggested method for structural optimization of closed cooling tower09-03

    The core component of the closed cooling tower is the tubular transpiration cooler, and its structural parameters have an important influence on the optimization planning of the closed cooling tower. Therefore, the structural optimization of the closed cooling tower focuses on the structural optimization of the tube transpiration cooler...

  • Calculation method of cooling tower motor power

    Calculation method of cooling tower motor power09-02

    In order to correctly select the power of the cooling tower motor, the following calculations or comparisons must be made. Guangdong Teling Air Conditioning will introduce to users the calculation method of the cooling tower motor cooling tower motor power...

 108    1 2 3 4 5 6 7 8 9 10 Nextpage LASTPAGE

News

Contact

Guangdong Trlon Energy-saving Air Conditioning Equipment Co., Ltd.

Contact:Mr. Wang

Free Hotline:4008-8383-95

Company Email:sales@trlon.com

Web Site:https://www.trlen.com/

Company Address: 1916A, Block A, David Donglong Business Building, Longhua, Longhua District, Shenzhen

Trlon WechatClose
alibaba