A brief description of how low the minimum temperature of a closed cooling tower can be: The minimum temperature of the cooling tower can be cold to several degrees, depending on your leakage temperature, and the type of cooling tower used and the cooling
If the hospital wants to carry out the central air-conditioning transformation, it is a complicated and large project. Today, the central air-conditioning cooling tower manufacturers will come to analyze which season is the most suitable for the hospital's central air-conditioning cooling tower renovation and what part of the renovation budget includes.
When the glass fiber reinforced plastic cooling tower is built or built and put into use, it is necessary to properly record all the characteristic data and cooling tower information of the actual operation status of the accessories and operation process.
After a certain period of operation time of the cooling tower radiating filler, the performance of the uniform distribution of water will decrease, and the cooling effect of the cooling tower will be significantly reduced. Therefore, replacing the filler is also a process of removing the blockage. It is the core component of cooling tower heat dissipation. T
The noise generated by the cooling tower fan has its own unique characteristics, so the noise control methods of the integrated fan are also different, and you must start from all aspects and take all-round shots to get good characteristics.
Fans are a kind of machinery and equipment that everyone often uses. Fans often generate a lot of noise during the entire process, but they may not be very aware of the special noise caused by accumulation, and the main root cause of the noise I don’t know much about it. Today everyone comes to understand the root cause of the fan.
FRP cooling towers are used for cooling and cooling of central air-conditioning and industrial machinery. The quality of the flowing air in the tower determines the role of water-to-air heat exchange. When the FRP cooling tower is insufficiently ventilated, the water-to-air heat exchange performance will decrease accordingly.
1. Find the leaking point 2. Clean the leaking point and the 30 cm surrounding area 3. Dry it with a hair dryer or absorb water with lime powder 4. Use a special glass fiber reinforced plastic material to waterproof and stop the leak 5. Wait for it to dry, of course, about two Fourteen hours
The central air-conditioning cooling tower equipment of Shenzhen Modern Performing Arts Center brings troubles to nearby residents and seriously affects the normal life of residents. How to achieve no disturbance to the residents without affecting the heat dissipation of the host, Teling recommends the cooling tower solution with noise reduction technology
Generally speaking, the cooling tower is placed outdoors, and the surrounding working environment is not good. With the increase of time, dust will also block the cooling tower packing. Today trlon will introduce to you the method of reducing the blockage of the cooling tower filler under the FRP cooling tower
Guangdong Trlon Energy-saving Air Conditioning Equipment Co., Ltd.
Company Address： 1916A, Block A, David Donglong Business Building, Longhua, Longhua District, Shenzhen