Trlon air conditioner manufacturers have silent cooling towers, closed cooling towers and cooling tower noise reduction, maintenance and transformation services.
National Service Hotline National Service Hotline:

4008-8383-95

Your current location:HOME > News > FAQ

FAQ

  • The correct operation method of cooling tower

    The correct operation method of cooling tower09-27

      The correct operation method of cooling tower  Although the cooling tower is an accessory equipment in the air conditioning refrigeration system, it plays an important role in dissipating the total heat absorbed by the entire system. Therefore, the correct operation of the cooling tower directly affects the cooling effect and energy saving of the entire ai

  • Scope of application and installation reference for cooling towers

    Scope of application and installation reference for cooling towers09-27

      Scope of application of cooling tower  The waste heat generated in industrial production or refrigeration processes is generally guided away by cooling water. The function of a cooling tower is to exchange heat between the cooling water carrying waste heat and the air inside the tower, transferring the waste heat to the air and dissipating it into the atmo

  • Basic principles of cooling tower operation and components of cooling tower

    Basic principles of cooling tower operation and components of cooling tower09-27

      Working principle, installation, selection and fault analysis of cooling tower  Basic Principles of Cooling Tower Operation 1. Basic Principles of Cooling Tower Operation  Dry (low enthalpy) air is drawn by a fan and enters the cooling tower through the air intake network; High temperature water molecules with high partial pressure of saturated steam flow

  • Precautions for Cooling Tower Design and Selection

    Precautions for Cooling Tower Design and Selection09-27

      Precautions for Cooling Tower Design and Selection  Regarding the location setting:  1. The cooling tower should be installed in a clean and well ventilated environment, and a certain distance should be maintained during the installation of the tower group to ensure that it meets the design requirements for air volume.  2. Cooling towers should be installe

  • Key points to note before operating the cooling tower

    Key points to note before operating the cooling tower09-26

      Key points to note before operating the cooling tower  1. During installation, please refer to the "Pipeline Installation Instructions" and select the appropriate pipeline length, number of gate valves, number of bends, links, direct pipe joints, and so on Other hose fittings should be determined based on the actual situation in the required fiel

  • Precautions for seasonal initial start-up of cooling tower

    Precautions for seasonal initial start-up of cooling tower09-26

      Initial and Seasonal Launch  Before turning on the device power, check the following:  1. Remove all debris, such as leaves and garbage on the style fence.  2. Rinse the spray tank to remove sediment and dirt.  3. Check if the mechanical float valve is operating flexibly.  4. Check the nozzles of the water distribution system and clean them if necessary. C

  • Maintenance and upkeep of cooling towers during operation

    Maintenance and upkeep of cooling towers during operation09-26

      Maintenance and upkeep of cooling towers during operation  As an important cooling equipment, the cooling tower should be maintained and managed by a dedicated person, with maintenance and observation of its operation. It is important to regularly pay attention to changes in current and water temperature, and to check for any abnormal sounds. If there are

  • Suggestions for long-term shutdown of cooling towers

    Suggestions for long-term shutdown of cooling towers09-26

      Suggestions for long-term shutdown of cooling towers  When the system is shut down for a long time, the following operations should be performed.  The water in the evaporative cooling equipment should be drained.  2. Rinse the spray tank clean.  3. The drainage of the cold water tray should be kept open.  4. The adjustment bolts of the ventilation fan bear

  • What is the reason for water leakage in a closed cooling tower?

    What is the reason for water leakage in a closed cooling tower?09-16

      Closed cooling towers are suitable for various cooling systems that require high circulating water quality, and have application prospects in power, chemical, steel, food, and many industrial fields. A closed cooling tower is a comprehensive product that combines aerodynamics, thermodynamics, fluid mechanics, chemistry, biochemistry, materials science, and

  • What is a closed cooling tower recirculation system?

    What is a closed cooling tower recirculation system?09-16

      A closed cooling tower is a device that uses water as a circulating coolant to absorb heat from the device and discharge it into the atmosphere to reduce water temperature. Its cooling is achieved by exchanging cold and heat between water and air to generate steam, which evaporates to take away heat. The evaporative heat dissipation device realizes the pri

 295   Home Pripage 1 2 3 4 5 6 7 8 9 10 Nextpage LASTPAGE

News

Contact

Guangdong Trlon Energy-saving Air Conditioning Equipment Co., Ltd.

Contact:Mr. Wang

Free Hotline:4008-8383-95

Company Email:sales@trlon.com

Web Site:https://www.trlen.com/

Company Address: 1916A, Block A, David Donglong Business Building, Longhua, Longhua District, Shenzhen

Trlon WechatClose
alibaba