Many typical cases of central air-conditioning closed cooling towers of Teling Air Conditioning show that in recent years, the use of cross-flow closed cooling towers for central air-conditioning equipment has become a trend. Traditional central air-conditioning equipment used open cooling towers for circulating water cooling. Methods of cooling often cause various problems and high energy consumption problems due to heat exchanger fouling, which makes people headaches. The cross-flow closed cooling tower solves the problem of reduced and higher effects of central air conditioning due to heat exchanger fouling. The energy consumption problem, how to choose the model of the central air-conditioning cross-flow closed cooling tower?
When choosing the model of a cross-flow closed cooling tower for central air-conditioning, it should be considered that when the weather is hot, the cross-flow cooling tower cannot meet the design concept temperature and humidity standards due to the natural environment standards. When the cooling effect is more severely discounted, it should also be considered. After the cooling tower has been in operation for several years, the working efficiency of its packing layer, fan and water distributor is reduced. Therefore, when selecting the volume of the cross-flow closed cooling tower, there must be sufficient margin. According to the experience of Teling Air Conditioning, it is not too much to choose a cooling tower with twice the cooling capacity.
The standard cooling water flow is more than half of the total standard flow of the selected cross-flow closed cooling tower, and the water flow is dispersed. Whether it is a normal situation or an abnormal phenomenon in severe hot weather, a better cooling effect can be obtained. After cooling, The water temperature is lower; although the hot weather affects the cooling effect of the cross-flow closed cooling tower, due to the large volume of the cross-flow closed cooling tower, in fact, the cooling capacity can almost exceed the demand of the refrigeration equipment, so the cooling water temperature can be guaranteed and will not be biased. high. Cross-flow closed-type cooling towers usually account for a small investment in overall equipment. Even if you choose a cross-flow closed-type cooling tower that is twice as large, there will not be much investment. However, in operation, the cooling water temperature can be controlled at a lower state, and the cooling The cooling effect of the equipment is high, and the energy and water loss saved in one year of operation is almost enough to buy a matching cross-flow cooling tower.
The editor will give you an example in the next closed cooling tower technology news and information to explain the analysis of the central air conditioning cross flow closed cooling tower model selection, I hope you will continue to pay attention! How to achieve the central air conditioning cross flow closed cooling tower model selection? Central air conditioning How to choose the cross-flow closed cooling tower model?
Guangdong Trlon Energy-saving Air Conditioning Equipment Co., Ltd.
Company Address： 1916A, Block A, David Donglong Business Building, Longhua, Longhua District, Shenzhen