FRP cooling tower is a key component of the design of all residential buildings or commercial buildings. These special-purpose units operate on the basis of reducing the temperature of the residual water by evaporating the gas together. Although FRP cooling towers are very efficient in discharging the cooling water that heats up, they are not maintenance-free. With the passage of time, airborne dirt, nutrients and debris are likely to accumulate in different parts of the FRP cooling tower. If these pollutants are not cleaned and removed according to the glass fiber reinforced plastic cooling tower, erosion and blockage will occur, which may reduce the operating efficiency.
1. Why must the packing and machinery equipment of glass fiber reinforced plastic cooling tower be clean?
The contractor cleans the FRP cooling tower. Ideally, you should clean the FRP cooling tower filling at least twice a year. Clean glass fiber reinforced plastic cooling tower will directly endanger energy efficiency, which will save costs with the passage of time. In addition, the cleaning of FRP cooling towers can increase the service life of FRP cooling tower machinery and equipment, and control the presence of dangerous pathogens such as Legionella.
In winter, algae and bacteria will go to sleep in the glass fiber reinforced plastic cooling tower. If warm weather comes and the flow returns, this kind of algae and bacteria becomes an ideal natural environment for incubation. If the equipment is filled with water and not filled, the erosion will increase. Along with the accumulation of scaling and erosion and the gradual fall off at the end, these rusty fall off will block and overflow the distribution plate, which will lead to an increase in water demand, a shortened concentration cycle and a shortened life of machinery and equipment.
Two, standard glass fiber reinforced plastic cooling tower cleaning procedures
Glass fiber reinforced plastic cooling tower consumes a lot of energy. When they get dirty, they will pull even bigger. By cleaning the FRP cooling tower on time, you can restore work efficiency and help reduce energy consumption and prevent Legionella. Before the gradual cleaning process of the glass fiber reinforced plastic cooling tower, it is very important to turn off the fan power as much as possible and check whether there may be areas in the glass fiber reinforced plastic cooling tower that must be paid attention to. Subsequently, sufficient disinfection is achieved before cleaning.
Then, apply professional vacuum equipment to remove the sludge from the sink. These portable fire stations are used for cleaning with large amounts of water, and high-pressure cleaners are used for this operation. In the end, disinfection after cleaning is implemented to reduce the risk of Legionella.
3. How to clean glass fiber reinforced plastic cooling tower
The water treatment of FRP cooling towers is subject to stringent control. Local laws require strict filling and maintenance of FRP cooling towers to prevent the spread of potentially fatal pathogens. Timely cleaning and maintenance not only help to reduce explosive hazards to a greater extent, but also protect your machinery and equipment from harmful scale, erosion and scaling.
The cleaning of the glass fiber reinforced plastic cooling tower before and after the comparison of the sump pool requires professional skills and knowledge of the machinery and equipment at hand. In the closed cooling tower manufacturer trlon air conditioner provides professional cleaning services provided by a team of professionally trained water treatment experts. The Cooling Tower Water Company has served the local area for many years and has the necessary experience to operate. For other information or arrangements to clean the glass fiber reinforced plastic cooling tower, please call the cooling tower manufacturer directly for free consultation.
Guangdong Trlon Energy-saving Air Conditioning Equipment Co., Ltd.
Company Address： 1916A, Block A, David Donglong Business Building, Longhua, Longhua District, Shenzhen