Trlon air conditioner manufacturers have silent cooling towers, closed cooling towers and cooling tower noise reduction, maintenance and transformation services.
National Service Hotline：
4008-8383-95
National Service Hotline：
4008-8383-95
How does the decrease in circulating water volume of stainless steel closed cooling tower cause
The regular discharge of stainless steel closed cooling towers mainly refers to the removal of sludge, moss, and corrosion products from the cooling tower's water receiving tray, reducing the weight of the water receiving tray itself, preventing blockage of the return water pipeline, reducing the turbidity rate of circulating water, and enhancing the cooling effect of the cooling tower. The quality of circulating water in a cooling tower directly determines its cooling effect and service life.
Reasons for the decrease in water volume in stainless steel closed cooling towers:
1. Front filter: The front filter on the suction pipe of the fiberglass closed cooling tower is blocked, causing the water flow to be blocked.
2. Water pump: caused by a malfunction of the water pump in the closed cooling tower.
3. Water volume in the pool: caused by insufficient water volume in the fiberglass closed cooling tower pool.
Treatment measures for stainless steel closed cooling tower:
1. Conductivity: Check if the front filter of the fiberglass closed cooling tower is blocked. If it is blocked, perform conductivity treatment.
2. Replace the water pump: Check if the water pump of the fiberglass closed cooling tower has malfunctioned. If the problem has already occurred, it is recommended to replace it with a new one.
3. Water addition: Check if the water level in the fiberglass closed cooling tower pool is sufficient. If not, add an appropriate amount of water.
It doesn't matter whether the water quality of the stainless steel closed cooling tower is good or bad, as long as the tower body is regularly drained. In fact, the drainage of the cooling tower can only temporarily remove the obstacles inside the tower, and the cooling tower packing and spray system have not been effectively cleaned. Once the cooling tower packing and spray system are blocked, it directly affects the cooling of the cooling tower; So the quality of the circulating water in the cooling tower directly determines the cooling effect and service life of the cooling tower.
Why does the auxiliary equipment of stainless steel closed cooling tower need an expansion water tank
The collection tank of a stainless steel closed cooling tower is actually equivalent to an expansion tank. Due to the consideration of the heat balance issue of buried and taken away underground in winter and summer (in Jiangsu and Zhejiang regions). A cooling tower has been installed for the ground source heat pump.
When there is no need for a closed cooling tower, there is no problem as the solenoid valves at the inlet and outlet can be turned off. But when using a cooling tower, I am worried that there may be some problems with the constant pressure expansion tank in front of the water pump.
Simply put, the cooling tower is open and has atmospheric pressure, but there is a constant pressure tank in front of the water pump. Is there any problem.
Article Address：https://www.trlen.com/baike/764.html
Guangdong Trlon Energy-saving Air Conditioning Equipment Co., Ltd.
Contact：Mr. Wang
Free Hotline：4008-8383-95
Company Email：sales@trlon.com
Web Site：https://www.trlen.com/
Company Address： 1916A, Block A, David Donglong Business Building, Longhua, Longhua District, Shenzhen
