Solve the problem of water leakage in different parts of a closed cooling tower

　　At present, most closed cooling towers on the market use materials that are not easily corroded or damaged, such as galvanized steel plates and fiberglass. The coolant also flows in the enclosed copper tube. In theory, it won't leak, but why do people always respond by saying their cooling tower is leaking?Y0LCooling tower noise reduction treatment manufacturer

　　There may be many reasons for water leakage in closed cooling towers, which could be due to prolonged use, aging, or malfunctions. Even newly installed closed cooling towers can leak water, so do not panic, as it may be due to manufacturing deviations. Based on experience, Xiao Bian briefly summarized the main parts of leakage in closed cooling towers: tower corrosion damage leakage, tower section connection leakage, pipeline leakage, and water pump leakage. He also briefly introduced the methods for blocking leakage in closed cooling towersY0LCooling tower noise reduction treatment manufacturer

　　1. Corrosion and leakage of tower body

　　This part of the water leakage is caused by long-term corrosion in the operating environment, which affects the tower material and leads to uneven thickness of the tower. Destructive water leakage can occur in thinner areas. Methods for blocking FRP cooling towers: Surface cleaning, polishing cleaning, degreasing with cleaning agents, epoxy repair agents+fiberglass tape reinforcement methods can be used.Y0LCooling tower noise reduction treatment manufacturer

　　2. Leakage at the junction of the tower and the water tank

　　When assembling a closed cooling tower, the aluminum zinc plate should be compacted and sealed firmly with sealant. Long term operation and the impact of water spray can cause deformation of the cooling tower body, leading to the detachment of sealant and water leakage at the connection. Leak sealing method: As each part is made of aluminum zinc plate, we can fill the gaps inside the cooling tower with sealing plugs to prevent water leakage.Y0LCooling tower noise reduction treatment manufacturer

　　3. Leakage of connecting pipe

　　When the pipeline is connected to a closed cooling tower, some flanges and elbows will be connected together; Based on past experience, a sealing ring will be added between the two connections. If the pipeline leaks, most of the reasons are that the pipeline connection is not tight, and the sealing ring is damaged or displaced, which can lead to weak sealing and water leakage. Leakage blocking method: We can tighten the pipeline or replace the sealing ring with a new one.Y0LCooling tower noise reduction treatment manufacturer

　　If a closed cooling tower is found to be leaking, don't worry, we will first check which part is leaking and promptly and targetedly deal with it.Y0LCooling tower noise reduction treatment manufacturer

Article Address：https://www.trlen.com/news/702.html