How often must the cooling tower filler be replaced?

How often do you need to replace the cooling tower packing? The following cooling tower manufacturer trlon will give you a general explanation:gMICooling tower noise reduction treatment manufacturer
Cooling towers are generally used for 4-8 years. The fillers of cooling towers will generally accumulate a lot of fouling. Some fillers have been used for a few years, the fillers are seriously aging, resulting in many cooling tower fillers being deformed and broken, which directly affects the cooling tower heat dissipation effect At this time, cooling tower maintenance is indispensable, because once the cooling tower filler is aging, it will cause air intake obstruction, because the filler is used for a long time, even if it is used for water treatment and cleaning, it is difficult to clean the cooling tower The dirt and moss left by the packing for a long time, so the air intake is greatly hindered. The cooling tower packing is the core part of the cooling tower. The aging of the packing directly leads to one of the reasons for the poor efficiency of the cooling tower. If it is not replaced, The cooling effect of the cooling tower is poor, which causes the air-conditioning host to work for a long time, which not only affects the life of the host, but also greatly affects the energy consumption, resulting in serious power consumption, serious direct tripping, and normal use. Then how to replace the cooling tower filler, Guangdong Kangming Energy Conservation Air Conditioning Co., Ltd. is a manufacturer specializing in the replacement of cooling tower packing. The company undertakes the maintenance of cooling towers in Shenzhen. It has 16 years of experience in cooling tower transformation. The procedure of cooling tower packing replacement is to remove the old cooling tower packing and clean the tower. Dirt, many parts of the water sowing basin are blocked and must be cleaned. Some need to be re-opened to ensure uniform water distribution. After cleaning the cooling tower, reinstall the new cooling tower packing. The packing installation must keep each honeycomb shape clean. , To ensure that there is no problem with each ventilation. The construction steps of the cooling tower filler replacement and reconstruction project are as follows:gMICooling tower noise reduction treatment manufacturer
Before cooling tower packing modification:

After cooling tower packing modificationgMICooling tower noise reduction treatment manufacturer

gMICooling tower noise reduction treatment manufacturer

Article Address：https://www.trlen.com/baike/199.html