How to treat the exterior of the cooling tower with anti-corrosion measures?

　　The cooling tower of an open cooling tower manufacturer mainly consists of a tower body, an axial flow fan, an upper air inlet regulating window, a finned tube radiator, a water collector, and a packing layer. The solution of external materials for open cycle cooling towers is very important, as long-term use can easily lead to various problems. During the entire process of cooling tower water temperature reduction, it comes into contact with gas and returns to the tower body, and the increase of dirt and residue will endanger the normal operation of mechanical equipment.9RmCooling tower noise reduction treatment manufacturer

　　Treat the metal surface of the open cycle cooling tower and apply anti-corrosion coating to improve the corrosion resistance of the material. The quality of metal surface treatment is directly related to the adhesion, construction quality, and service life of building coatings. The anti-corrosion treatment of the metal surface at the bottom of the cooling tower of open cooling tower manufacturers:9RmCooling tower noise reduction treatment manufacturer

　　(1) Use various equipment and ash knives to clean the uneven areas and concrete particles on the outer surface of the open cooling tower, and clean them thoroughly with cleaning agents.9RmCooling tower noise reduction treatment manufacturer

　　(2) The outer periphery of the concrete base material used for the appearance of the machinery and equipment should be smooth and firm, without sand, shells, gaps, honeycomb surfaces, and oil stains.9RmCooling tower noise reduction treatment manufacturer

　　Metal surface treatment of mechanical equipment for open cycle cooling towers from manufacturers:9RmCooling tower noise reduction treatment manufacturer

　　(1) To solve the problem of paint peeling, the original paint will be subject to various erosion during the entire application process, and the coating will become brittle, bulging, and peeling. Clean up this paint and spray it again.9RmCooling tower noise reduction treatment manufacturer

　　(2) To solve the problem of rusting, the outer surface of the open circulating cooling tower from the manufacturer of the open cooling tower has been cleaned of rust and oxide skin protrusions. The mechanical equipment surface is free of rust, oil stains, and dirt, and the exposed uniform metal texture is smooth with too many curves.9RmCooling tower noise reduction treatment manufacturer

　　There are many metal surface treatment conditions for open cycle cooling towers from manufacturers of open cooling towers, but they are only a part of them, which can also help solve the problem of post rust prevention. The methods of material corrosion cleaning and rust removal are listed one by one. We hope that the above part is helpful to you.9RmCooling tower noise reduction treatment manufacturer

Article Address：https://www.trlen.com/baike/664.html