Discussion on the installation, bonding and use of the cooling tower packing of Laxun
Author：Trlon Views: Time:2020-10-30
Talk about the installation, bonding and use of Lanxun cooling tower packing
What is the bonding and installation of Lanxun cooling tower packing? Today, let’s find out how to do it. Lanxun’s cooling tower packing is a long flow tower with green water, so why not hang it with a tilt angle of 5.5 degrees. Go up.
(1) According to the specific situation of the filling site of the Lanxun cooling tower, the bottom of the tower is glued and assembled. The adhesion of the water-sprinkling filler should be firm, and immediately use a rigid clamp after assembling a group to prevent the forming piece from being detached due to its distortion.
(2) Laxun cooling tower packing can be moved and placed on a flat place only after it has been glued and dried. The pile height should not exceed two meters to avoid prolonged exposure.
(3) During the installation of the cooling tower filler assembly blocks, the upper and lower adjacent layers are placed orthogonally and perpendicular to each other. The equipment is divided into sections and laid neatly. The blocks are squeezed and distributed. Irregular spaces such as edges, column circumferences, tower circumferences, etc. are in accordance with the essence. The upper area is cut reasonably, the insurance is neatly laid, the cover is tight, and the larger seam does not exceed 20 mm.
(4) Laxun cooling tower packing installation in the middle of the river immediately kicks and kicks the packing layer and the frame, leaving no storage of scattered objects.
(5) After the packing of the cooling tower is installed, when it is necessary to work on the packing, be sure to lay flat materials and step on it with one hand.
(6) When setting up the filling of the cooling tower, Lanxun will send a special officer to be responsible for reviewing the status, and is good at taking notes of the ground-breaking acceptance, and ensuring the quality of installation and use.